Manual · Helix SSPA Controller
Helix SSPA Controller¶
Control and protection for solid-state HF amplifiers. The controller pairs an STM32G474 control board with an ESP32-P4 touch display, switches bands automatically from your radio, and trips in hardware on SWR, filter reflection, temperature and current.
Pick your hardware revision in the tabs on each page. This manual matches firmware [x.y]; use the version menu at the top to read an older one.
RF safety
High RF power. Never operate without a proper load or antenna connected.
-
Assembly, wiring and first power-up.
-
Radio profiles, band data, power and rotator calibration.
-
Downloads and changes for each version.
-
Stuck on setup or calibration? We connect to your station PC and help you get on the air.